feat(access template) : Create the Access jinja template (#8)

- Switch do dind
- update host IPs configuration

.devcontainer/devcontainer.json

@@ -1,5 +1,5 @@
 {
-    "image": "ghcr.io/srl-labs/containerlab/devcontainer-dood:latest",
+    "image": "ghcr.io/srl-labs/containerlab/devcontainer-dind:latest",
     "runArgs": [
         "--network=host",
         "--pid=host",

containerlab/hosts/h1_interfaces

@@ -3,5 +3,5 @@ iface lo inet loopback
 
 auto eth1
 iface eth1 inet static
-    address 10.100.100.1
+    address 10.0.0.10
     netmask 255.255.255.0

containerlab/hosts/h2_interfaces

@@ -3,5 +3,5 @@ iface lo inet loopback
 
 auto eth1
 iface eth1 inet static
-    address 10.100.100.2
+    address 100.0.0.2
     netmask 255.255.255.0

containerlab/hosts/h3_interfaces

@@ -3,5 +3,5 @@ iface lo inet loopback
 
 auto eth1
 iface eth1 inet static
-    address 10.100.100.3
+    address 100.0.0.20
     netmask 255.255.255.0

templates/access.j2

@@ -0,0 +1,27 @@
+{# Check if device has location and tenant #}
+{%- if device.location and device.location.tenant %}
+{%- set tenant = device.location.tenant %}
+{%- set tenant_vlans = tenant.vlans.all() %}
+
+{# Create VLANs only if tenant_vlans exists and is not empty #}
+{%- if tenant_vlans and tenant_vlans|length > 0 %}
+{# Create VLANs #}
+{%- for vlan in tenant_vlans %}
+vlan {{ vlan.vid }}
+   name IRB_{{ tenant.name|upper }}_SERVICE
+!
+{%- endfor %}
+
+{# Configure trunk port on Ethernet1 #}
+interface Ethernet1
+   switchport mode trunk
+   switchport trunk allowed vlan {{ tenant_vlans|map(attribute='vid')|join(',') }}
+!
+
+{# Configure access port on Ethernet2 with first VLAN from tenant #}
+interface Ethernet2
+   switchport access vlan {{ tenant_vlans[0].vid }}
+   switchport mode access
+!
+{%- endif %}
+{%- endif %}