Damien/arista-evpn-vxlan-clab
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
fb682fdb19e04f0095400b3bb1a48999c02c2d7e
arista-evpn-vxlan-clab/TROUBLESHOOTING.md

20 KiB
Raw Blame History

EVPN-VXLAN Fabric Troubleshooting Guide

This guide provides systematic troubleshooting steps for Arista EVPN-VXLAN fabrics with MLAG.

📋 Table of Contents

  1. Troubleshooting Methodology
  2. Layer 1: Physical Connectivity
  3. Layer 2: MLAG & Port-Channels
  4. Layer 3: Underlay (BGP IPv4)
  5. Layer 4: Overlay (BGP EVPN)
  6. Layer 5: VXLAN Data Plane
  7. End-to-End Traffic Flow
  8. Common Issues & Solutions

🔍 Troubleshooting Methodology

Always troubleshoot bottom-up:

Physical Links → MLAG → Underlay BGP → Overlay EVPN → VXLAN → Traffic Flow

For each layer:

  1. ✅ Verify expected state
  2. ❌ Identify issues
  3. 🔧 Apply fixes
  4. ♻️ Re-verify

Layer 1: Physical Connectivity

Check Interface Status

On all switches (spines + leafs):

# Quick overview
show interfaces status

# Detailed view of a specific interface
show interfaces Ethernet11

# Check for errors
show interfaces Ethernet11 | include error|drop|discard

Expected Output:

Ethernet11 is up, line protocol is up (connected)
  Hardware is Ethernet, address is 001c.7300.000b
  Internet address is 10.0.1.1/31
  MTU 9214 bytes

Troubleshooting:

  • down/down → Physical issue (cable, peer interface)
  • up/down → Layer 2 issue (switchport config, STP)
  • Check MTU: Should be 9214 on underlay P2P links

Layer 2: MLAG & Port-Channels

2.1 Verify MLAG Peering

On each MLAG leaf pair (e.g., leaf1/leaf2):

# MLAG global status
show mlag

# MLAG detailed info
show mlag detail

# MLAG interfaces
show mlag interfaces

Expected Output (show mlag):

MLAG Configuration:
domain-id               : leafs
local-interface         : Vlan4090
peer-address            : 10.0.199.255
peer-link               : Port-Channel999

MLAG Status:
state                   : Active
negotiation status      : Connected
peer-link status        : Up
local-int status        : Up
system-id               : 0c:1d:c0:1d:62:10
dual-primary detection  : Configured

Troubleshooting:

Issue Cause Fix
state: Inactive Peer-link down Check Po999 and Ethernet10
negotiation: Connecting VLAN4090 issue Verify IP addressing, peer-address config
peer-link: Down Port-Channel999 down Check show port-channel 999
dual-primary: Detected Peer-link failed + heartbeat failed Check mgmt network connectivity

2.2 Verify MLAG Peer-Link (Port-Channel999)

# Port-Channel status
show port-channel 999

# Detailed view
show port-channel 999 detailed

# LACP status
show lacp interface Port-Channel999

Expected Output:

Port Channel Port-Channel999 (Fallback State: Unconfigured):
Active Ports: Ethernet10

Troubleshooting:

  • No active ports → Check show interfaces Ethernet10
  • Wrong mode → Should be switchport mode trunk
  • Missing VLANs → Check switchport trunk group mlag-peer

2.3 Verify Host-Facing Port-Channels (MLAG)

On each leaf connected to hosts:

# Port-Channel status
show port-channel 1

# MLAG status for Po1
show mlag interfaces Port-Channel1

# LACP neighbor
show lacp neighbor

Expected Output (show port-channel 1):

Port Channel Port-Channel1 (Fallback State: individual):
Active Ports: Ethernet1

Expected Output (show mlag interfaces):

                                            local/remote
 mlag        desc             state       local       remote          status
------ -------------- ------------- ----------- ------------ ---------------
    1          host1  active-full          Po1          Po1          up/up

Troubleshooting:

Issue Cause Fix
inactive MLAG peering down Fix MLAG first (section 2.1)
active-partial Remote Po1 down on peer leaf Check peer leaf's Po1
configured-inactive Missing mlag 1 config Add mlag 1 to Po1
No LACP neighbor Host bonding issue Check host: ip link show bond0

2.4 Verify iBGP Peering Link (VLAN 4091)

# VLAN4091 interface status
show ip interface Vlan4091

# Ping peer
ping vrf default 10.0.3.1 source 10.0.3.0

Expected:

  • Interface: up/up
  • Ping: Successful

Layer 3: Underlay (BGP IPv4)

3.1 Verify BGP Neighbors (Underlay)

On Spines:

# BGP summary
show ip bgp summary

# Specific neighbor
show ip bgp neighbor 10.0.1.1

Expected Output:

Neighbor         V  AS      MsgRcvd   MsgSent  InQ OutQ  Up/Down State  PfxRcd PfxAcc
10.0.1.1         4  65001       245       243    0    0 02:01:23 Estab  2      2
10.0.1.3         4  65001       245       243    0    0 02:01:20 Estab  2      2
...

On Leafs:

# BGP summary
show ip bgp summary

# Check underlay peer-group
show bgp peer-group underlay

Expected neighbors:

  • eBGP to both spines (state: Estab)
  • iBGP to MLAG peer (state: Estab)

3.2 Verify Loopback Reachability

On any leaf, ping all other loopbacks:

# Ping spine loopbacks
ping 10.0.250.1 source 10.0.250.11
ping 10.0.250.2 source 10.0.250.11

# Ping other leaf loopbacks
ping 10.0.250.13 source 10.0.250.11
ping 10.0.250.15 source 10.0.250.11
ping 10.0.250.17 source 10.0.250.11

# Ping VTEP loopbacks (important!)
ping 10.0.255.12 source 10.0.255.11
ping 10.0.255.13 source 10.0.255.11
ping 10.0.255.14 source 10.0.255.11

Expected:

  • All pings successful
  • RTT < 10ms (virtual environment)

Troubleshooting:

# Check routing table
show ip route

# Verify loopback advertisements
show ip bgp 10.0.250.13

# Check BGP is advertising loopbacks
show ip bgp neighbors 10.0.1.0 advertised-routes

Common issues:

  • Missing network 10.0.250.X/32 in BGP config
  • Missing network 10.0.255.X/32 (VTEP loopback!)
  • BGP neighbor not activated in IPv4 address-family

3.3 Verify ECMP (Equal-Cost Multi-Path)

# Check routes to a remote loopback
show ip route 10.0.250.13

# Should show multiple next-hops
show ip route 10.0.250.13 detail

Expected Output:

 B E    10.0.250.13/32 [20/0] via 10.0.1.0, Ethernet11
                               via 10.0.2.0, Ethernet12

Two paths via both spines = ✅ ECMP working

Layer 4: Overlay (BGP EVPN)

4.1 Verify EVPN Neighbors

On Spines:

# EVPN summary
show bgp evpn summary

# Check specific neighbor
show bgp evpn neighbor 10.0.250.11

Expected:

  • All 8 leafs in Estab state
  • PfxRcd > 0 (receiving EVPN routes)

On Leafs:

# EVPN summary
show bgp evpn summary

Expected:

  • Both spines in Estab state
  • PfxRcd > 0

4.2 Verify EVPN Routes

Check EVPN route types:

# Type-2: MAC/IP routes (L2 VXLAN)
show bgp evpn route-type mac-ip

# Type-3: IMET routes (VXLAN flood list)
show bgp evpn route-type imet

# Type-5: IP Prefix routes (L3 VXLAN)
show bgp evpn route-type ip-prefix ipv4

Expected for L2 VXLAN (VLAN 40):

show bgp evpn route-type mac-ip

Output should show:

  • Local MACs (learned on Port-Channel1)
  • Remote MACs (from other VTEPs via EVPN)

Expected for L3 VXLAN (VRF gold):

show bgp evpn route-type ip-prefix ipv4

Output should show:

  • Local subnets (e.g., 10.34.34.0/24 on VTEP2)
  • Remote subnets (e.g., 10.78.78.0/24 from VTEP4)

4.3 Troubleshoot EVPN Issues

No EVPN neighbors:

# Check if EVPN is activated
show running-config | section evpn

# Should see:
# address-family evpn
#    neighbor evpn activate

No EVPN routes received:

# Check route-target configuration
show running-config | section vlan 40

# Should have:
# vlan 40
#    rd 65001:110040
#    route-target both 40:110040
#    redistribute learned

EVPN routes received but not installed:

# Check VXLAN interface
show interfaces Vxlan1

# Verify VNI mapping
show vxlan vni

Layer 5: VXLAN Data Plane

5.1 Verify VXLAN Interface

# VXLAN interface status
show interfaces Vxlan1

# VNI to VLAN mappings
show vxlan vni

# VTEP flood lists
show vxlan flood vtep

# Address table (MAC learning)
show vxlan address-table

Expected Output (show interfaces Vxlan1):

Vxlan1 is up, line protocol is up (connected)
  Hardware is Vxlan
  Source interface is Loopback1 and is active with 10.0.255.11
  Replication/Flood Mode is headend with Flood List Source: EVPN
  Remote MAC learning via EVPN
  VNI mapping to VLANs
  Static VLAN to VNI mapping is
    [40, 110040]
  Static VRF to VNI mapping is
    [gold, 100001]

Expected Output (show vxlan vtep):

Remote VTEPS for Vxlan1:

VTEP           Tunnel Type(s)
-------------- --------------
10.0.255.12    flood, unicast
10.0.255.13    flood, unicast
10.0.255.14    flood, unicast

Total number of remote VTEPS:  3

5.2 Verify MAC Learning

Check local MAC learning:

# MACs learned on Port-Channel1
show mac address-table interface Port-Channel1

# MACs learned via VXLAN
show mac address-table interface Vxlan1

# Combined view for a VLAN
show mac address-table vlan 40

Expected Output:

          Mac Address Table
------------------------------------------------------------------
Vlan    Mac Address       Type        Ports      Moves   Last Move
----    -----------       ----        -----      -----   ---------
  40    00c1.ab00.0011    DYNAMIC     Po1        1       0:05:23 ago
  40    00c1.ab00.0033    DYNAMIC     Vx1        1       0:05:20 ago
  • Local host MAC → learned on Po1
  • Remote host MAC → learned on Vx1 (VXLAN)

5.3 Verify VXLAN Address Table

# VXLAN-specific MAC table
show vxlan address-table

# Detailed view
show vxlan address-table vlan 40

Expected Output:

          Vxlan Mac Address Table
----------------------------------------------------------------------
VLAN  Mac Address     Type     Prt  VTEP             Moves   Last Move
----  -----------     ----     ---  ----             -----   ---------
  40  00c1.ab00.0033  EVPN     Vx1  10.0.255.13      1       0:05:20 ago

Shows which remote VTEP the MAC is behind!

End-to-End Traffic Flow

Scenario: host1 (VTEP1) pings host3 (VTEP3) - L2 VXLAN

Both hosts in VLAN 40 (10.40.40.0/24)

Step 1: Host Sends Packet

On host1:

docker exec -it clab-arista-evpn-fabric-host1 sh

# Check bond interface
ip link show bond0

# Check VLAN interface
ip link show bond0.40

# Send ping
ping 10.40.40.103

Expected:

  • bond0: state UP
  • bond0.40: state UP

Step 2: Packet Arrives at leaf1 (VTEP1)

On leaf1:

# Check Port-Channel received the packet
show interfaces Port-Channel1 | include packets

# Check MAC learning
show mac address-table dynamic vlan 40

# Should see host1's MAC on Po1

Traffic flow:

host1:bond0.40 → [802.1Q VLAN 40] → leaf1:Eth1 → Po1

Step 3: Leaf1 Lookup & VXLAN Encapsulation

Leaf1 checks MAC table:

show mac address-table address 00c1.ab00.0033

# Output:
# VLAN 40, MAC 00c1.ab00.0033 → Vxlan1

Leaf1 checks VXLAN address-table:

show vxlan address-table address 00c1.ab00.0033

# Output:
# VLAN 40, MAC 00c1.ab00.0033 → VTEP 10.0.255.13

Encapsulation:

Original: [Eth: host1→host3][IP: 10.40.40.101→103][ICMP]

VXLAN:    [Outer IP: 10.0.255.11→10.0.255.13]
          [Outer UDP: src=random, dst=4789]
          [VXLAN Header: VNI=110040]
          [Inner Eth: host1→host3][IP: 10.40.40.101→103][ICMP]

Step 4: Underlay Routing

Leaf1 routes outer packet:

# Check route to remote VTEP
show ip route 10.0.255.13

# Output:
# via 10.0.1.0, Ethernet11  (spine1)
# via 10.0.2.0, Ethernet12  (spine2)

ECMP: Packet can go via spine1 OR spine2!

Spine forwards based on outer IP:

# On spine1
show ip route 10.0.255.13

# Output:
# via 10.0.1.5, Ethernet3  (leaf5)

Step 5: Packet Arrives at leaf5 (VTEP3)

On leaf5:

# Check VXLAN received the packet
show interfaces Vxlan1 | include packets

# VXLAN decapsulation happens automatically

Decapsulation:

VXLAN packet → Strip outer IP/UDP/VXLAN headers
→ Original frame: [Eth: host1→host3][IP: 10.40.40.101→103][ICMP]

Leaf5 checks MAC table:

show mac address-table address 00c1.ab00.0033

# Output:
# VLAN 40, MAC 00c1.ab00.0033 → Port-Channel1

Step 6: Packet Delivered to host3

leaf5:Vxlan1 → VLAN 40 → Po1 → Eth1 → host3:bond0.40

On host3:

docker exec -it clab-arista-evpn-fabric-host3 sh

# Check received ping
ping 10.40.40.101  # Reply should work!

Complete Flow Diagram

┌─────────────────────────────────────────────────────────────────┐
│                    L2 VXLAN Traffic Flow                        │
└─────────────────────────────────────────────────────────────────┘

host1 (10.40.40.101)                                host3 (10.40.40.103)
  │                                                        ▲
  │ 1. Send ping to 10.40.40.103                          │
  │    [VLAN 40 tag]                                      │ 6. Receive reply
  │                                                        │    [VLAN 40 tag]
  ▼                                                        │
leaf1:Po1                                            leaf5:Po1
  │                                                        ▲
  │ 2. MAC lookup:                                        │ 5. MAC lookup:
  │    00c1.ab00.0033 → Vx1 → 10.0.255.13                │    00c1.ab00.0011 → Vx1
  │                                                        │
  ▼                                                        │
leaf1:Vxlan1                                         leaf5:Vxlan1
  │                                                        ▲
  │ 3. VXLAN encap:                                       │ 4. VXLAN decap:
  │    Outer: 10.0.255.11 → 10.0.255.13                  │    Strip outer headers
  │    VNI: 110040                                        │
  │    Inner: original frame                              │
  │                                                        │
  ▼                                                        │
leaf1:Eth11 ──────► spine1 ──────► leaf5:Eth11 ──────────┘
         (underlay BGP routing)

Common Issues & Solutions

Issue 1: Ping Fails Between Hosts in Same VLAN

Symptoms:

  • Host1 cannot ping Host3 (both VLAN 40)
  • MACs not learning

Troubleshooting Steps:

# 1. Check Port-Channel
show port-channel 1
# → Should show active ports

# 2. Check VLAN config
show vlan 40
# → Should show Po1 as member

# 3. Check MAC learning
show mac address-table vlan 40
# → Should see local host MAC on Po1

# 4. Check VXLAN interface
show interfaces Vxlan1
# → Should be up/up

# 5. Check remote VTEPs
show vxlan vtep
# → Should list remote VTEPs

# 6. Check EVPN routes
show bgp evpn route-type mac-ip
# → Should see remote MACs

# 7. Check VXLAN address-table
show vxlan address-table vlan 40
# → Should see remote MACs via Vx1

Common Causes:

Issue Fix
Port-Channel down Check LACP, add fallback config
MLAG not synced Fix MLAG peering (VLAN 4090)
VNI not configured Add vxlan vlan 40 vni 110040
EVPN not advertising Add redistribute learned under vlan 40 in BGP
Wrong route-target Verify RT matches on all VTEPs

Issue 2: Ping Fails Between VRFs (L3 VXLAN)

Symptoms:

  • host2 (10.34.34.102) cannot ping host4 (10.78.78.104)
  • Both in VRF gold

Troubleshooting Steps:

# 1. Check VRF routing
show ip route vrf gold

# 2. Check BGP EVPN Type-5 routes
show bgp evpn route-type ip-prefix ipv4

# 3. Check VRF VNI mapping
show vxlan vni
# → Should show VRF gold → VNI 100001

# 4. Check SVI is in VRF
show ip interface Vlan34
# → Should show "VRF: gold"

# 5. Check virtual gateway
show ip virtual-router

Common Causes:

Issue Fix
SVI not in VRF Add vrf gold under interface Vlan34
VRF not mapped to VNI Add vxlan vrf gold vni 100001
Route-target mismatch Verify route-target both evpn 1:100001
BGP not redistributing Add redistribute connected under vrf gold

Issue 3: MLAG Port-Channel Inactive

Symptoms:

show mlag interfaces
# mlag 1: configured-inactive

Troubleshooting:

# 1. Check MLAG global state
show mlag
# → Should be "Active"

# 2. Check Port-Channel on BOTH leafs
show port-channel 1

# 3. Check MLAG config on BOTH leafs
show running-config interfaces Port-Channel1
# → Should have "mlag 1"

# 4. Check peer leaf
# SSH to peer and run: show port-channel 1

Fix:

  • Ensure BOTH leafs have mlag 1 configured
  • Ensure MLAG peering is up first
  • Check peer leaf's Port-Channel status

Issue 4: LACP Not Establishing

Symptoms:

show port-channel 1
# No Active Ports
# Configured, but inactive ports:
#    Ethernet1: waiting for LACP response

Fix:

# Add LACP fallback
configure
interface Port-Channel1
   port-channel lacp fallback timeout 5
   port-channel lacp fallback individual

Verify:

show port-channel 1
# → Should show Ethernet1 in "Active Ports" (fallback mode)

# Wait 5 seconds, check LACP
show lacp neighbor
# → Should show LACP neighbor if host is configured correctly

Issue 5: BGP EVPN Neighbors Not Establishing

Symptoms:

show bgp evpn summary
# Neighbors stuck in "Connect" or "Active" state

Troubleshooting:

# 1. Check underlay reachability
ping 10.0.250.1 source Loopback0

# 2. Check EVPN neighbor config
show running-config | section evpn

# 3. Check if EVPN is activated
show bgp evpn neighbors 10.0.250.1
# → Look for "Address Family: evpn"

# 4. Check for BGP errors
show bgp evpn summary
show log | include BGP|EVPN

Common Fixes:

  • Add neighbor evpn activate in address-family evpn
  • Check update-source Loopback0 is configured
  • Verify ebgp-multihop 3 for leaf-spine peering
  • Check send-community extended is configured

Quick Reference Commands

Health Check Script

Run these commands on each leaf for quick validation:

#!/bin/bash
# Quick EVPN-VXLAN Health Check

echo "=== Physical Interfaces ==="
show interfaces status | include Ethernet[1-9]

echo "=== MLAG Status ==="
show mlag | include state|negotiation|peer-link

echo "=== BGP Underlay ==="
show ip bgp summary | include Estab|Neighbor

echo "=== BGP EVPN Overlay ==="
show bgp evpn summary | include Estab|Neighbor

echo "=== VXLAN ==="
show interfaces Vxlan1 | include "is up|Source interface"
show vxlan vtep

echo "=== Port-Channels ==="
show port-channel summary

echo "=== MAC Addresses ==="
show mac address-table count

Traffic Flow Verification

Test L2 VXLAN (VLAN 40):

# On host1
ping 10.40.40.103 -c 3

# On leaf1 (VTEP1)
show mac address-table address 00c1.ab00.0033
show vxlan address-table address 00c1.ab00.0033

# On leaf5 (VTEP3)
show mac address-table address 00c1.ab00.0011
show vxlan address-table address 00c1.ab00.0011

Test L3 VXLAN (VRF gold):

# On host2
ping 10.78.78.104 -c 3

# On leaf3 (VTEP2)
show ip route vrf gold 10.78.78.0/24
show bgp evpn route-type ip-prefix ipv4 10.78.78.0/24

# On leaf7 (VTEP4)
show ip route vrf gold 10.34.34.0/24

Additional Resources

Happy Troubleshooting! 🚀

Reference in New Issue View Git Blame Copy Permalink