Update README and add fabric configuration

README.md

@@ -42,3 +42,11 @@ The project directory is structured as follows:
 
 - Once the lab is deployed, you can access the individual nodes (spines and leaves) via CLI or SSH to configure and test VXLAN-EVPN functionalities.
 - Use the `hosts` directory to modify or apply specific configurations.
+
+## Known Issues
+
+On Alpine Linux hosts 1 and 2, it is necessary to install the vlan package:
+
+```bash
+apk add vlan
+```

documentation/eos configuration/leaf1.md

@@ -75,7 +75,7 @@ neighbor 10.1.1.0 activate
 To check peer status :
 
 ```cli
-leaf1# show bgp summary
+show bgp summary
 ```
 
 ## BGP EVPN Overlay
@@ -105,3 +105,10 @@ address-family ipv4
 no neighbor 10.10.110.2 activate
 redistribute connected route-map RMAP_VTEP
 ```
+
+To check peer status :
+
+```cli
+show bgp summary
+show bgp evpn
+```

documentation/eos configuration/leaf2.md

@@ -75,5 +75,40 @@ neighbor 10.1.1.0 activate
 To check peer status :
 
 ```cli
-leaf1# show bgp summary
+show bgp summary
+```
+
+## BGP EVPN Overlay
+
+```config
+interface Loopback0
+description VTEP
+ip address 10.10.110.2/32
+!
+ip prefix-list VTEP_PREFIX seq 10 permit 10.10.110.2/32
+!
+route-map RMAP_VTEP permit 10
+match ip address prefix-list VTEP_PREFIX
+!
+router bgp 65102
+neighbor 10.10.110.1 peer group VTEP_GROUP
+neighbor 10.10.110.1 remote-as 65101
+neighbor 10.10.110.1 update-source Loopback0
+neighbor VTEP_GROUP peer group
+neighbor VTEP_GROUP ebgp-multihop 5
+neighbor VTEP_GROUP send-community extended
+!
+address-family evpn
+neighbor 10.10.110.1 activate
+!
+address-family ipv4
+no neighbor 10.10.110.1 activate
+redistribute connected route-map RMAP_VTEP
+```
+
+To check peer status :
+
+```cli
+show bgp summary
+show bgp evpn
 ```