Update schema and devices configuration

documentation/eos configuration/leaf1.md

@@ -0,0 +1,57 @@
+# Leaf 1 configuration
+
+## Pre-config Setup
+
+Enable the multi-agent configuration on Arista switch to be able to use EVPN feature
+
+```config
+service routing protocols model multi-agent
+```
+
+## IP address Configuration
+
+Configure need to match with [Lab Topology](../../lab_vxlan.yml)
+
+```yml
+links:
+        - endpoints: ["spine1:eth1", "leaf1:eth1"]
+        - endpoints: ["spine1:eth2", "leaf2:eth1"]
+        - endpoints: ["leaf1:eth2", "host1:eth1"]
+        - endpoints: ["leaf2:eth2", "host2:eth1"]
+```
+
+That means :
+
+```config
+interface Ethernet1
+description TO_SPINE01
+no switchport
+ip address 10.1.1.1/31
+!
+interface Ethernet2
+description TO_HOST1
+switchport mode trunk
+!
+interface Loopback0
+description VTEP
+ip address 10.10.110.1/32
+!
+```
+
+## BGP Protocol
+
+```config
+router bgp 65101
+router-id 10.10.110.1
+maximum-paths 4 ecmp 4
+neighbor SPINE_GROUP peer group
+neighbor SPINE_GROUP allowas-in 1
+neighbor SPINE_GROUP ebgp-multihop 4
+neighbor SPINE_GROUP send-community extended
+neighbor SPINE_GROUP maximum-routes 12000
+neighbor 10.1.1.0 peer group SPINE_GROUP
+neighbor 10.1.1.0 remote-as 65001
+!
+address-family ipv4
+neighbor 10.1.1.0 activate
+```